Accessories - Wish Audio

to create a grounding effect through the conductivity of different metals. The grounding surface area is greatly enhanced by the fine spraying and frosting treatment. A total of 6 capacitive Crystal EPs made of banded high-purity aluminum foils are used to further increase the grounding surface area. Total 68,000 cm2 grounded surface area, 68 times larger than Crystal E. Newly designed screws for improved venting, connection, and transparency. Small but heavy 830g. Includes RCA-Y and Y-Y 1.2 meter long ground cables. Made in Aomori, Japan. The Crystal E-G is an advanced version of the Crystal-E. The basic structure of the new E-G is identical to that of the limited edition E Jtune, but each layer of the interior has been more precisely milled (the picture above shows a milled layer on the left and a milled layer on the right), and the high-precision milling process has increased the surface area and the grounding effect. Specification Virtual Ground Terminal: M4 x 2 Terminals (Steel Gold Plated 3 Point Pot Screws)Laminated surface area: 68,000 cm2External dimensions: W 3.1 x H 1.4 x D 4.4 inches (80 x 35 x 111 mm); Does not include terminals or protrusions.Weight: Approx. 28.6 oz (830Accessories (Crystal E): Dedicated ground cable x 2, warranty cardRCA plug-Y terminal (M4) 4.9 ft (1.2 m) x 1 piece (gold plated)Y-terminal (M6) - Y-terminal (M4) 4.9 ft (1.2 m) x 1 (gold plated)

Read more less

Crystal E is a ground box with multi-layer dissimilar metal structure like Force barEP. However, after the redesign of the shape, the ground surface area has been greatly increased by 1.75 times, and the effect is better than ever. The new design not only increases the surface area of ​​each layer of metal plates, but also reserves 0.5mm gaps between the layers of metal plates. The design is similar to the Heat Sink structure, and the dissimilar metal structure is more than the previous 6 layers (copper/brass/copper) /Brass/Copper/Steel> upgrade to 8-layer <Stainless Steel/Brass/Copper/Brass/Copper/Brass/Copper/Brass> is the key to the smaller Crystal E having a larger grounding area than before. The housing material has also been improved. In the past, Force barEP only used 2mm stainless steel top cover and 1.5mm aluminum bottom plate. The Crystal series has been strengthened into 2mm aluminum top cover and 2mm steel bottom plate. The low center of gravity design makes the body more stable and helps improve the sound quality. . The ground terminal of Crystal E uses M4-inch stainless steel screws to fix the ground wire of the Y-shaped plug, and it can be connected firmly by ordinary Phillips screwdriver. There are two ground terminals on the fuselage. In addition to connecting audio equipment, you can also connect one more Crystal E in series to enhance the effect.In order to be the best, Crystal E focused on the floor box function, deleted the other functions of Force barEP, and redesigned the fuselage structure to create a new low-center multi-layer alien metal structure to maximize the floor box effect.Crystal E comes with two 1.2-meter ground wires, one is RCA ‒ Y plug, and the other is Y ‒ Y plug. The same high-quality coaxial cable is used as before, with gold-plated plugs.The RCA ‒ Y plug ground wire is suitable for connecting audio equipment with analog input and output terminals, such as amplifiers, and connects to vacant RCA terminals.The Y ‒ Y plug ground wire is suitable for connecting to the housing of audio equipment that has no vacant RCA terminals, or equipment with GND terminals. Specifications: Dimensions: W80 × H35 × D111 [mm] (excluding terminals or protrusions) Weight: Approx. 775g Accessories: RCA plug - Y terminal (M4) (1.2m), Y terminal (M4) - Y terminal (M6) (1.2m)

Read more less

Advanced Optical Galvanic Isolation to remove electrical noise and interference Error correction, crosstalk cancellation, and jitter elimination for improved musical timing Supports 1000BASE-T (IEEE 802.3x) Ethernet Ultra-low noise internal DC-DC power supply design Inject in between your router/switch and network audio streamer Silence the noise in your network music streamers, 4K media player, Apple TV 4K, and music streaming computers The LAN iPurifier Pro offers a seamless, plug-and-play mechanism designed to enhance the connection between the router or switch and network streamer, significantly improving audio and video streaming quality. The LAN iPurifier Pro utilizes Optical Galvanic Isolation technology to effectively isolate and eliminate electrical noise and interference emanating from the router or switch, which in turn, minimizes system noise, errors, and jitter. The LAN iPurifier Pro is compatible with a wide range of network devices, such as 4K media boxes and media streaming PCs, ensuring an experience free from jitter and noise. SHEDDING LIGHT ON ISOLATION Even though increasing system noise greatly increases the jitter of a Streamer/DAC and reduce its performance, little is done to try to isolate it from undesired system noise transferred via the LAN connections. The optical galvanic isolation technology used by the LAN iPurifier Pro converts incoming LAN signals into optical (light) signals and back again. Consequently, the input and output are completely isolated electrically, preventing any noise from the LAN system from getting into the stream or DAC. SPEED WITHOUT COMPROMISE LAN iPurifier Pro is designed for transparent data transmission, meeting network connection standards: 1000BASE-T (Gigabit Ethernet) IEEE 802.3x standard 1000/100/10Mbps Supported Compatible with wide range of network devices (4K Media Boxes, Media Streaming PC’s.) SPECIFICATIONS Connectivity Input: (x1) RJ45 Output: (x1) RJ45 Power: (x1) USB-C Ethernet: IEEE 802.3x Speed Supported: 1000/100/10Mbps Power Supply: USB-C 5V/1A Dimensions: 3.9” x 3.7” x 0.95” (99mm x 92.8mm x 24.2mm) Net weight: 8.5 oz (241g)

Read more less

Details & Specs Noise reduction: > 40dB (> 100x) Surge Protection: max. 30,000A @ 1,000V/10uS Operating Voltage: 90V – 265V Plug. Play. Believe.The AC iPurifier is for anyone whose audio is troubled by interference or distortion caused by dirty mains power. It will rid your system of electromagnetic (EMI) or radio-frequency (RFI) interference and brings clean, clear sound to your audio in an instant. It is available for UK (via an adapter), EU and USA power sockets and can handle from 100 – 240 volts. Military-gradeThe AC iPurifier uses iFi’s Active Noise Cancelation technology inspired by military engineering. It ACTIVELY eliminates far more noise across the frequency range than a passive product, even across the lower frequencies. No harm. No hum.The AC iPuriifier boasts inbuilt earth/ground and polarity detection. You can always be certain the polarity is correct and that you have the necessary ground/earth connection. Smart thinking.iFi's Intelligent Ground system ensures the AC iPurifier will not introduce a ground loop when one isn’t needed. Use the 4.4mm grounding socket safe in the knowledge that the AC iPurifier‘s ‘smart’ thinking will keep your system ground loop-free. No ground loops mean no annoying hum or buzz. Now, that’s music to our ears. Safe and sound.And with in-built surge protection, the AC iPurifier will shut down if it detects a short or a power surge. Your equipment will remain safe and sound. Many hands may light work…And the same can be said for AC iPurifiers… The more you use, the cleaner the power. And, you can also add them to your power strip. Why not separate your digital and analog devices to lessen noise contamination even further?

Read more less