Products

It’s head-fi. It’s desk-fi. And it’s hi-fi.The NEO iDSD 2 is iFi's versatile new 3-in-1 DAC/Amp, designed specifically for CAS audiophiles. It pairs effortlessly with your headphones as a Head-Fi DAC/Amp, can be used as a pure DAC with your integrated amplifier, or serve as a DAC/Preamp for your active speakers and power amplifier. It features the latest Bluetooth 5.4, supporting the new aptX Lossless, the only Bluetooth codec capable of streaming lossless CD-quality audio without sacrificing audio quality. The NEO iDSD 2 has improved headphone and line outputs, providing ample power for your high-demanding headphones, as well as power amplifiers.My Blue isn’t your blue. It’s new and Lossless.The NEO iDSD 2 features the latest Bluetooth 5.4 technology, supporting the new aptX Lossless codec, which provides a maximum bitrate of 1,200kbps. In comparison, aptX Adaptive has a maximum bitrate of 420kbps, while LDAC offers a higher bitrate of 990kbps. However, aptX Lossless is the first and only Bluetooth codec capable of streaming CD-quality audio without using a compression method that degrades sound quality. While other Bluetooth codecs claim to support CD-quality and even hi-res audio, they employ lossy compression during transmission, which negatively affects sound quality. The NEO iDSD 2 used Qualcomm’s new QCC518x Bluetooth audio chip, is qualified to Bluetooth 5.4, supported all* Bluetooth formats including: aptX Lossless, aptX Adaptive, aptX, LDAC, LHDC/HWA, AAC and SBC. *As of 22 Sep 2023. Check your device for Bluetooth codec support.5x more headphone output power than its predecessor.You heard me correctly – the headphone output power of the NEO iDSD 2 is a whopping 5 times more powerful than that of the 1st-gen NEO iDSD. With a maximum headphone output power of 5,551 mW (@ 32Ω), it outperforms even some dedicated headphone amplifiers, making them sweat. The headphone section has seen significant improvement, as we’ve essentially integrated a Diablo headphone circuit into it. It features Auto iEMatch to reduce annoying hiss from high-sensitivity headphones without losing any dynamic range and four gain settings ranging from -12dB to +16dB, making it suitable for all your IEMs and headphone types, from super-sensitive to power-hungry. The NEO iDSD 2 is not only a powerhouse, but it’s also tailored for your ears. The newly added analogue processing modes, XSpace and XBass II, along with the four digital filters, allow you to finetune the sound. Both XSpace and XBass II are pure analogue signal processing modes designed to adjust the soundstage and low-frequency response to match your headphones.Stand by you. No matter up or down.Whether you’re using the NEO iDSD 2 as a Desk-Fi or Hi-Fi, you can position it horizontally or vertically. The new 2-inch color display automatically rotates to suit the orientation. When using it as a Desk-Fi, you can position it vertically on your desk to save space. Set it to variable output, and with its powerful 19.5V maximum balanced output, it works well with your active speakers with volume control. The volume control is analog, which is superior to any digital volume control. When using the NEO iDSD 2 as a Hi-Fi, you can place it horizontally. It can serve as a pure DAC, playing all Hi-Res music files from PCM 32-bit/768kHz to DSD512 and full MQA decoding. You can also connect it directly to your power amplifier as a preamplifier, utilizing its analogue volume control.Clean, accurate resolution.The internal GMT femto-precision clock, combined with a smart storage cache, forms an advanced jitter reduction system. It effectively reduces jitter in the digital signal, producing cleaner and more accurate sound. If you possess a more accurate external clock, or if you wish to synchronize with other devices such as CD players or network streamers that have an external clock input, you can connect both the NEO iDSD 2 and the other devices to the external clock via the 10MHz External Sync Clock input for even greater clock signal accuracy. It’s rare to find an External Sync Clock input in this price range. Even if you don’t have an external clock, the internal GMT femto-precision clock still offers excellent performance in its class.More than new features. Enhanced circuitry.The NEO iDSD 2’s enhanced PureWave circuit design, with its balanced dual-mono topology and short signal paths, is known for outstanding linearity and minimal noise and distortion, offering you exceptional sonic purity. The results are an improved Signal-to-Noise Ratio (SNR) of >120dB(A), Dynamic Range (DNR) of -120dB(A), and Total Harmonic Distortion plus Noise (THD+N) of <0.0015%, bringing the NEO iDSD 2’s performance on par with DACs at a higher price point.Introducing the new iFi Nexis App.Introducing the iFi Nexis App for your NEO iDSD 2. Simply search for “NEO iDSD 2” in the app to access a suite of features and settings. Easily perform OTA upgrades, which automatically update your device over the network. The app offers a convenient way to control your NEO iDSD 2, allowing you to adjust functions and settings with ease. Download the iFi Nexis App now and experience the full potential of your NEO iDSD 2.Input / Output• USB 3.0 (2.0 Compatible)/ Digital S-PDIF(Coaxial/Optical)• Blutooth 5.4 (aptX Lossless, aptX Adaptive, aptx, LDAC, HWA/LHDC, AAC and SBC)• Balanced XLR 19.5V max.(variable) 4.4V fixed• Single Ended Stereo RCA 10.5V max. (variable) 2.2V fixed• 4.4mm Pentacon Balanced & 6.3mm SE Headphones OutThe Specs• Native DSD/PCM Burr-Brown MultiBit (With MQA support up to 384kHz)• SNR: -112dB(A) @0dBFS / THD+N @ 0.0015% Line OUT• Headphone Output - 5.77V(1040mW) @32ohms / 6.4V(68.6mW) @600ohms [Balanced] & 3V(2950mW) @32ohms / 3.3V(17.6mW) @600ohms [Single Ended]• Headphone Out THD+N: (125mW @32ohms) - 0.0015%• Dynamic Range: -120dB(A)• Power Consumption (No Signal) ~0.5W (Max Signal) ~2.5W• Output Impedance (Headphone Bal/UnBal) <1ohm• Dimensions 8.4" x 5.7" x 1.6" / Weight 2.14 lbsCompatible Operating Systems• iOS & Mac via Apple Lightening to USB Camera Adapter• Windows via USB or Digital COAXIAL & Android via USB OTG Cable

Read more less

Equipped with a USB-C input for plug-and-play connectivity Offers both 6.3mm single-ended and 4.4mm balanced headphone outputs, delivering up to 390mW of power for various headphones and earphones Features RCA and 4.4mm balanced outputs with variable and fixed volume settings, allowing for seamless connection to your active speakers, preamplifiers, or power amplifiers Includes XBass+ to restore lost bass frequencies from open headphones Comes with PowerMatch, a switchable gain to ensure optimal power for the headphones you are using Improved low-jitter GMT (Global Master Timing) clock provides >20dB better performance Improved circuitry, including enhanced DC offset, ensures heightened signal purity and accuracy Incorporates a 16-Core XMOS low-latency microcontroller for DSD512 and MQA full decoding Key Specs Form Factor Desktop Converter Type D/A Converter Number of Channels 2x D/A Maximum Sampling Rate 768 kHz / 32-Bit (DoD/DSD over PCM) Number of Microphone Inputs No Analog Audio I/O 1x Stereo RCA Unbalanced Line Output1x 4.4 mm TRRRS Balanced Headphone Output1x 1/4" TRS Unbalanced Headphone Output Digital Audio I/O No Converter Type D/A Converter Number of Channels 2x D/A Converter Circuitry D/A Chipset:Burr-Brown Display No Maximum Sampling Rate 768 kHz / 32-Bit (DoD/DSD over PCM) Number of Microphone Inputs No Expansion Slots No Connectivity Analog Audio I/O 1x Stereo RCA Unbalanced Line Output1x 4.4 mm TRRRS Balanced Headphone Output1x 1/4" TRS Unbalanced Headphone Output Digital Audio I/O No Host Connection 1x USB-C Host Connection Protocol USB 2.0, USB 3.0 / 3.1/3.2 Gen 1 USB (Non-Host) No Sync I/O No Network I/O No MIDI I/O No Wireless No Performance Frequency Response 5 Hz to 90 kHz ±3 dB Maximum Output Level RCA Line Outputs:+3.3 V (Switchable)4.4 mm Headphone Outputs:+6.2 V (Switchable) Headphone Output Power 1/4":300 mW into 32 Ohms70 mW into 600 Ohms4.4 mm:210 mW into 32 Ohms18 mW into 600 Ohms Impedance Headphone Outputs:< 1 OhmLine Outputs:≤ 200 Ohms (Balanced)≤ 100 Ohms (Unbalanced) Dynamic Range Headphone:≥ 109 dBA (at 0 dBFS)Line:≥ 113 dBA (at 0 dBFS) SNR Headphone Outputs:> -109 dBA (at 0 dBFS)Line Outputs:> -113 dBA (at 0 dBFS) THD+N 4.4 mm Headphone Outputs:< 0.0005% (Balanced)1/4" Headphone Outputs:< 0.013%4.4 mm Line Outputs:< 0.0015% (Balanced)RCA Line Outputs:0.003% Digital Audio Sample Rates 768 kHz (PCM) Bit Depths Up to 32-Bit Digital Audio Decoding DSD Sync Sources Internal Compatibility OS Compatibility No Mobile App Compatible No Power Power Requirements AC/DC Power Adapter (Not Included), USB Bus Power DC Input Power 5 VDC at 0.5A Power Consumption 2.5 W (Maximum)0.5 W (Idle) Physical Dimensions 6.2 x 4.6 x 1.4" / 15.7 x 11.7 x 3.6 cm Weight 1.0 lb / 454.0 g

Read more less

Delivers up to 2000mW of output power Compatible with xMEMS micro speaker technology Class A Discrete circuitry similar to iFi's flagship iCAN Phantom Movie and Gaming analog EQ modes XBass+ and XSpace restores bass and recreates lost soundstage Incredible Power. Uncompromising Clarity Today the world is busy, fast, and full of noise. iFi knows the power of music, and the unrivaled clarity of the ZEN CAN 3 envelops you with raw, unadulterated emotion. Hear the crack of a voice, the crescendo of a chorus, the delicate whisper of a piano... every note delivered with breathtaking precision. The ZEN CAN 3 ignites late-night listening sessions with its ability to effortlessly drive headphones from xMEMS-based IEMs to high-end planars. It delivers up to 2000mW output power through the same Class A circuitry found in their flagship iCAN Phantom. And with all-new analog EQ-modes, isolate yourself from the chaos of the outside world and allow for full immersion during intense gaming and movie marathons. Crisp Footsteps. Clear Voices. Future-Proof Features Ever watched a movie and struggled with the dialogue during a critical scene? Incredibly frustrating, we know. Enter Movie Mode, an EQ specifically designed to address the clarity of dialogue in streamed content, enabling you to fully immerse in the narrative without straining to decipher it. Game Mode caters directly to the needs of those looking for any advantage during competitive play. Hearing even the faintest sounds give away an opponent’s position or signal an approaching threat. Game mode’s EQ enhances this aspect of gameplay by sharpening subtle, low-level sound effects, ensuring that every sound becomes more distinct and easier to pinpoint. Finally, ZEN CAN 3 now supports IEMs using xMEMS, an innovative micro-speaker technology pushing the boundaries of headphone performance: Ultra-fast mechanical response, 150x faster than a typical dynamic driver Flat 2° phase response for more accurate sound reproduction +/- 1° phase matching for more accurate spatial sound Silicon speaker diaphragm, 95x more rigid than plastic, for reduced speaker break-up and less muddy midrange By incorporating xMEMS amplification, ZEN CAN 3 can deliver the voltage required for optimal operation of this cutting-edge technology, bringing the power of xMEMS to a whole new audience and ensuring that you are ready for the future as it happens. Prodigious Power With its impressive 2000mW output power, the ZEN CAN 3 offers a significant upgrade to the way you experience music through headphones, with unprecedented clarity and headroom. Its ability to handle dynamic peaks with ease means you can experience vivid, immersive and profoundly moving music. Whether it be planar magnetic headphones requiring more power for accuracy or high-impedance models needing ample current, the ZEN CAN 3 rises to the challenge. DSP-Free Purity Unlike other audiophile offerings, ZEN CAN 3’s features are done with analog circuitry, as opposed to Digital Signal Processing (DSP) where audio is manipulated before being converted to true analog sound. Instead, the ZEN CAN 3 leverages the natural advantages of analog circuitry: it maintains the integrity of the sound, introduces less phase shift and distortion, and boasts a more natural-sounding adjustment of frequencies. Specifications Input Voltage: DC 5V/2.5A | AC 100-240V, 50/60Hz Analog Inputs RCA L/R: 2.0V nominal @ 0dBFS, 1 MegΩ Zin 3.5mm: 1.0V nominal @ 0dBFS, 1 MegΩ Zin 4.4mm BAL: 4.0V nominal @ 0dBFS, 24kΩ Zin Gain: 0dB, 6dB, 12dB, 18dB Frequency Response: 10Hz-200kHz (-3dB) Power: ~5W (no signal) | ~13W (max signal) Dimensions: 6.2 "x 4.6" x 1.4” Net Weight: 1.09 lbs Headphone Out Impedance: 4.4mm BAL <2Ω | 6.3mm <1Ω Output (RMS) 4.4mm BAL: >11.5V/2000mW @64Ω 6.3mm: >7.2V/1600mW @32Ω Output (MAX) 4.4mm BAL: >15.1V/385mW @600Ω | >6.2V/1200mW @32Ω 6.3mm: >7.6V/98mW @600Ω | >7.2V/1600mW @32Ω xMEMS: 4.4mm BAL >21Vpp, 22Ω, 11V DC bias SNR 4.4mm BAL: ≥125dB (7.3V 4.4mm Input 0dB @ 600Ω) 6.3mm: ≥122dB (1.9V Input 0dB @600Ω) DNR: 4.4mm BAL: ≥119dB(A) @0dBFS | 6.3mm: ≥119dB(A) @0dBFS THD+N 4.4mm BAL: <0.006% (@360 mW/2.4V 16Ω) 6.3mm: <0.006% (@100mW/1.27V 16Ω) Line Out Impedance: <200Ω Output Level: 4Vrms (0dB 200kΩ load) SNR: ≥125dB (7.3V 4.4mm Input 0dB @200kΩ) DNR: ≥119dB(A) THD+N: 0.006% (0dB 200kΩ load) In the Box ZEN CAN v3 RCA Cable Power Adapter 3.5mm to 6.3mm adapter Quick Start Card + Instruction Card

Read more less

Output interface:– 3.5mm single-ended output– 4.4mm balanced output– 3.5mm optical fiber output (192k) DAC chip: ES9039Q2M Headphone amp configuration:– OPA1622 × 2– SGM8262 × 2 Architecture: CQAM (CrystalSync Quad Amp Module) Output power:– 3.5mm: ≥175mW + 175mW (32Ω, THD+N<1%)– 4.4mm: ≥520mW + 520mW (32Ω, THD+N<1%) Signal-to-noise ratio (SNR): 123dB (real user environment test) Dynamic range (DNR): 122dB (real user environment test) Total Harmonic Distortion + Noise (THD+N):– 3.5mm: 0.0005%– 4.4mm: 0.0005% Frequency response: ±0.2dB (20Hz – 20kHz) Compatible systems: Android, iOS, MacOS, Windows Versatile Output ModesEnhanced Freedom in Listening The ITM07 inherits iKKO’s Hi-Fi USB DAC triple-output modes,supporting 3.5mm, optical, and 4.4mm balanced outputs.This versatile connectivity allows audiophilesto easily unlock a multitude of pairing possibilities. Hi-Fi Audio Bridge for Mobile DevicesRedefining High-Quality Music Experience As a high-quality audio bridge betweenmobile devices and Hi-Fi streaming,the ITM07 offers top-tier performance on parwith professional portable players,enabling immersive, true-to-life music experiences wherever you go. Innovative CQAM ArchitectureAchieving High-Fidelity Audio Transmission The built-in CrystalSync Quad Amp Module (CQAM) features a dual active crystal oscillator design, ensuring high fidelity in audio data transmission. This preserves every musical detail, delivering pure and flawless sound quality. Flagship Dual-Stage AmplifierCrafting Ultimate Sound Texture On the analog side, a flagship dual-stage amplifier setup precisely controls sound quality without introducing any distortion. The ITM07 delivers smooth and detailed sound, perfectly capturing the layers and textures in your music. Radar Architecture CircuitEmpowering Dynamic Musical Expression Constructed with a radar architecture-level circuit board, the ITM07’s PCB supports a current capacity of up to 5A. Its zero-latency current transient processing enables superior dynamics, providing a wider soundstage,rapid transient response, and impressive, immersive audio clarity.

Read more less

12 Driver Quadrbrid design with EST, BA, Dynamic, and Bone Conduction Far exceeds the power and performance of anything Kinera has released previously Generous package with 4 varieties of eartips and 2 cables to explore all of Loki's sonic potential 1DD for Bass and Sub-bass: One 6mm dynamic driver is responsible for the low-frequency range. Kinera’s custom-made 6mm liquid diaphragm dynamic driver has excellent acoustic performance. Combined with a reasonable acoustic structure design, it can deliver a very relaxed, natural low-frequency performance that is full and elastic. 4 Knowles Mid Range BA + 2 Knowles Treble BA: Six Knowles balanced armatures include four mid-range and two high-frequency drivers. Custom-tuned by Kinera, these Knowles balanced armatures are responsible for Loki’s mid-range, with two additional Knowles balanced armatures connecting the mid and high frequencies via clever electronic and physical crossovers. Through fine tuning, they can handle both the natural low-frequency performance of the dynamic driver and the high-frequency advantage unique to electrostatic drivers, achieving a seamless integration of high, mid and low frequencies. 4 Sonion EST Drives for Ultra High Frequency and Airiness: Four electrostatic drivers are responsible for the ultra-high frequencies. One Sonion electrostatic driver works with four others to deliver Loki’s ultra-high frequency range, utilizing the wider frequency range, better transient response, stronger detail performance, and brighter yet still smooth sound characteristics of electrostatic drivers to interpret Loki’s sound. This results in extremely low distortion and a more realistic sound, bringing a bright and warm auditory experience. 1 Bone Conduction Driver: One bone conduction driver uses a contact-type bone conduction unit. Kinera’s custom-made contact-type bone conduction unit works in tandem with the low-frequency dynamic driver, providing a deeper, ultra-low-frequency performance with a unique bass presentation, forming an almost bottomless dive. SPECIFICATIONS Drivers:  6 Knowles BA + 4 Sonion EST + 1 DD + 1 Bone Conduction Driver Frequency Response:  20Hz-50kHz Sensitivity:  107 dB Impedance: 12Ω

Read more less

6 Driver Quadrbrid design with EST, BA, Dynamic, and Bone Conduction Custom Flash Acoustics cable, specially designed for Verdandi Balanced tonality provides excellent performance across many genres and styles. SOUND CHARACTERISTICS Verdandi offers balanced sound and excellent musical adaptability. It delivers ample and elastic low frequencies with a textured quality, achieved through a combination of dynamic driver and bone conduction for bass output. The two different units seamlessly integrate their respective advantages to maximize performance. In terms of vocals, the earphone provides clear spatial perception with a moderate distance, avoiding a close-up sensation while maintaining good density. The high-frequency range is delicate, transparent, and exhibits excellent extension and detailed rendering. With the inclusion of dual electrostatic drivers, the earphone ensures a stable and clear background for the voices of modern goddesses, creating an expansive soundstage for an immersive listening experience, particularly for live recordings. Overall, Verdandi offers a warm and refined sound signature characterized by balanced tonality and an expansive soundstage. It performs well across a range of genres, including chamber music, pop, and jazz. SPECIFICATIONS Drivers:  2 Knowles BA + 2 Sonion EST + 1 DD + 1 Bone Conduction Driver Frequency Response:  20Hz-50kHz Sensitivity:  105 dB Impedance: 14Ω

Read more less

KOJO TECHNOLOGY has the best performance ever!Crystal E-G combined with Crystal E Jtune high quality fine blasted + Crystal Ep series special aluminum electrolytic capacitors.The best performance model in history by KOJO TECHNOLOGY!Features of the crystal series: The Crystal E-G is introduced to the top model of Crystal E, which takes on the basics of the Crystal E Jtune, and uses fine blast processing with high precision sandblasting processing. Furthermore, it has a hybrid version of 6 special aluminum electrolytic capacitors used in the Crystal EP series.The Crystal E-G is a model that has the largest surface area in history of virtual earth made by KOJO TECHNOLOGY.Crystal E-G SpecificationVirtual Ground Terminal: M4 x 2 Terminals (Steel Gold Plated 3 Point Pot Screws)Laminated surface area: 68,000 cm2External dimensions: W 3.1 x H 1.4 x D 4.4 inches (80 x 35 x 111 mm); Does not include terminals or protrusions.Weight: Approx. 28.6 oz (830Accessories (Crystal E): Dedicated ground cable x 2, warranty cardRCA plug-Y terminal (M4) 4.9 ft (1.2 m) x 1 piece (gold plated)Y-terminal (M6) - Y-terminal (M4) 4.9 ft (1.2 m) x 1 (gold plated)

Read more less

Crystal E is a ground box with multi-layer dissimilar metal structure like Force barEP. However, after the redesign of the shape, the ground surface area has been greatly increased by 1.75 times, and the effect is better than ever. The new design not only increases the surface area of ​​each layer of metal plates, but also reserves 0.5mm gaps between the layers of metal plates. The design is similar to the Heat Sink structure, and the dissimilar metal structure is more than the previous 6 layers (copper/brass/copper) /Brass/Copper/Steel> upgrade to 8-layer <Stainless Steel/Brass/Copper/Brass/Copper/Brass/Copper/Brass> is the key to the smaller Crystal E having a larger grounding area than before. The housing material has also been improved. In the past, Force barEP only used 2mm stainless steel top cover and 1.5mm aluminum bottom plate. The Crystal series has been strengthened into 2mm aluminum top cover and 2mm steel bottom plate. The low center of gravity design makes the body more stable and helps improve the sound quality. . The ground terminal of Crystal E uses M4-inch stainless steel screws to fix the ground wire of the Y-shaped plug, and it can be connected firmly by ordinary Phillips screwdriver. There are two ground terminals on the fuselage. In addition to connecting audio equipment, you can also connect one more Crystal E in series to enhance the effect.In order to be the best, Crystal E focused on the floor box function, deleted the other functions of Force barEP, and redesigned the fuselage structure to create a new low-center multi-layer alien metal structure to maximize the floor box effect.Crystal E comes with two 1.2-meter ground wires, one is RCA ‒ Y plug, and the other is Y ‒ Y plug. The same high-quality coaxial cable is used as before, with gold-plated plugs.The RCA ‒ Y plug ground wire is suitable for connecting audio equipment with analog input and output terminals, such as amplifiers, and connects to vacant RCA terminals.The Y ‒ Y plug ground wire is suitable for connecting to the housing of audio equipment that has no vacant RCA terminals, or equipment with GND terminals. Specifications: Dimensions: W80 × H35 × D111 [mm] (excluding terminals or protrusions) Weight: Approx. 775g Accessories: RCA plug - Y terminal (M4) (1.2m), Y terminal (M4) - Y terminal (M6) (1.2m)

Read more less

to create a grounding effect through the conductivity of different metals. The grounding surface area is greatly enhanced by the fine spraying and frosting treatment. A total of 6 capacitive Crystal EPs made of banded high-purity aluminum foils are used to further increase the grounding surface area. Total 68,000 cm2 grounded surface area, 68 times larger than Crystal E. Newly designed screws for improved venting, connection, and transparency. Small but heavy 830g. Includes RCA-Y and Y-Y 1.2 meter long ground cables. Made in Aomori, Japan. The Crystal E-G is an advanced version of the Crystal-E. The basic structure of the new E-G is identical to that of the limited edition E Jtune, but each layer of the interior has been more precisely milled (the picture above shows a milled layer on the left and a milled layer on the right), and the high-precision milling process has increased the surface area and the grounding effect. Specification Virtual Ground Terminal: M4 x 2 Terminals (Steel Gold Plated 3 Point Pot Screws)Laminated surface area: 68,000 cm2External dimensions: W 3.1 x H 1.4 x D 4.4 inches (80 x 35 x 111 mm); Does not include terminals or protrusions.Weight: Approx. 28.6 oz (830Accessories (Crystal E): Dedicated ground cable x 2, warranty cardRCA plug-Y terminal (M4) 4.9 ft (1.2 m) x 1 piece (gold plated)Y-terminal (M6) - Y-terminal (M4) 4.9 ft (1.2 m) x 1 (gold plated)

Read more less

The MR-2 from Korg offers incredibly high-quality 1-bit recording in an ultra-portable design that's great for reporters, musicians, field audio recordists, and more. The MR-2 supports DSDIFF, DSF, and WSD 1-bit formats to capture every detail of the sonic world around you at SACD quality. It can also record multi-bit PCM formats at rates up to 24-bit/192kHz. The MR-2 writes your files to widely-available SD/SDHC flash memory cards for convenient storage and sharing. The included AudioGate software allows you to convert your 1-bit files into today's most popular file formats, including AIFF, FLAC, and MP3. Korg MR-2 Handheld 1-bit SD Recorder Features at a Glance: Multiple-format recording and playback, including SACD ultra-high-quality 1-bit DSD at 2.8224MHz, as well as multi-bit PCM formats up to 24-bit/192kHz DSDIFF/WSD/DSF/WAV(BWF)/MP3/MP2 recording and playback supported High-performance XY-configuration stereo electret condenser mic that's capable of rotating 210 degrees Screw mounts for easy tripod mounting 3.5mm mic input 3.5mm line input 3.5mm headphone output High-performance analog limiter, low-cut filter, and bass EQ 40 recording setups, with mic sensitivity, limiter, low-cut filter, and bass EQ settings 10 custom user settings Records directly to (and plays back from) SD or SDHD cards USB 2.0 (Mini-B-type USB connector) for high-speed data transfer Korg chromatic tuner built-in 128 x 128 pixel LCD with noiseless backlight Operates on 2 AA nickel-metal hydride batteries or via USB bus power

Read more less