Digital Players – Wish Audio

New Generation AKM AK4493SEQ DAC's | Quad DACs Design | 8-Core Qualcomm Snapdragon 665 CPU & Android 10 | Up to 720mW @ 320Ohm Power Output | 5-Inch 1080p Display | Glass & Aviation Grade Aluminium Construction Hi-Res 32 bit / 768kHz & DSD512 Latest-Generation of AKM DAC’s Are Here:Shanling M6 Ultra packs a quad DAC architecture. The player is equipped with four AK4493SEQ DAC chips, which are the first to come out since the AKM factory reopened after the accident. AK4493SEQ is a premium 32-Bit DAC chip that provides outstanding support for high-resolution audio signal decoding.Loaded With Open Android 10 OS:Shanling M6 Ultra brings modern Android 10 OS to the M6 lineup. Completely customize your experience with countless media applications on the M6 Ultra with Open Android OS. Users will be able to easily install different applications through the Google Play Store. Lightning-Fast Performance With Latest Snapdragon SoC:Shanling M6 Ultra comes with Snapdragon 665 SoC chip. Snapdragon 665 from Qualcomm is an 11nm highly-efficient 8-core SoC that gives great performance with no lag or stutters and at the same time provides great battery life. Full 16X MQA Unfolding:Shanling M6 Ultra supports full MQA 16x unfolding. It allows the users to play back and stream MQA audio files at their full glory. 16X unfolding opens the Master Quality Authenticated files to their best resolution and brings an authentic experience for the users. Along with MQA, the M6 Ultra also supports high-resolution PCM 32-Bit/768kHz and native DSD512 signals.Fully Balanced Amplifier Circuit:Shanling has treated the M6 Ultra with an OP and BUF amplifier chip based fully balanced analog circuit. It produces a powerful output providing up to 720mW of clean power through the balanced port. Users will be able to easily drive most IEMs with the M6 Ultra with ease.

Read more less

Shanling EC Smart is the new entry model of our CD player lineup, aiming to provide very simple and affordable CD playback to your home. Effortless CD solution for headphones, active monitors, powerful amplifiers or even Bluetooth speakers. Swing away the front control panel to reveal Sanyo DA11 optical drive, pop in your favourite CD and you are good to go. No complicated settings or smartphone apps, only a pure CD player with a few buttons and a basic infrared remote controller. Audio section utilizes Hi-Fi quality Cirrus Logic CS43131 DAC, offering clean and smooth sound. Just connect EC Smart to a pair of active monitors or even to a full speaker rig with powerful amplifiers, thanks to its rear line-out output (3.5mm jack, RCA adapter included). And for interrupted listening, we added a dedicated 3.5mm headphone output to the side of the CD player. Our new generation of CD players is unique thanks to its Bluetooth connectivity and we brought the same to the EC Smart. Just pair it with your favourite Bluetooth speakers to bring your CD collection into the world of modern wireless audio. SPECIFICATIONS Sanyo DA11 Optical DriveCirrus Logic CS43131 DACDot-Matrix ScreenHeadphone Amplifier SGM8262Output Power 180mW@32 OhmRear Line-Out Output (3.5mm, RCA adapter included)Side Headphone Output 3.5mmUSB-C Powered (5V/2A)Infrared Remote Control includedBluetooth Output (SBC support)Aluminium construction of main body and stand, plastic rear panel

Read more less

Product highlights High-quality ES9039Q2M D/A chip Fully balanced amplifier circuit Dual output ports (6.35mm and 4.4mm) 3.46-inch LCD touch screen High-resolution streaming with MA Player MA Remote App for iPhone, iPad, and Android Playback support from USB storage devices and NAS TIDAL, Qobuz, and HIGHRESAUDIO streaming support Internet radio support from vTuner and Radio Paradise High-quality USB DAC HDMI ARC input port S/PDIF optical and coaxial input interfaces RCA analog input with three input gain levels Gigabit Ethernet and dual-band Wi-Fi RM5 remote control with programmable button Specs CPU: Quad Cortex-A55 2.0GHz D/A chip: ES9039Q2M Coaxial & optical:  PCM 16-24Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz DSD 2.8MHz (DoP) HDMI ARC: PCM 16-24Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz USB audio:  PCM 16-24Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 705.6kHz, 768kHz MQA 16-24Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz MQA or MQA Studio stream DSD 2.8MHz, 5.6MHz, 11.2MHz (DoP) DSD 2.8MHz, 5.6MHz, 11.2MHz, 22.4MHz (Native) Line output XLR SNR: 127dB A-weighting THD+N:<0.00008%@1k, <0.00010%@20Hz-20kHz Frequency Response: 20Hz-20kHz ±0.1 -3dB@90kHz Channel Crosstalk: >-146dB Output Level: 4.4VRMS@0dB Line output RCA SNR: 121dB A-weighting THD+N:<0.00015%@1k, <0.00020%@20Hz-20kHz Frequency Response: 20Hz-20kHz ±0.1 -3dB@90kHz Channel Crosstalk: >-133dB Output Level: 2.2VRMS@0dB 4.4mm headphone output SNR: 117dB A-weighting THD+N:<0.0004%@20Hz-20kHz 4VRMS Frequency Response: 20Hz-20kHz ±0.1 -3dB@90kHz Output Impedance:<22Ω Output Power: 2200mw@33Ω, 950mw@300Ω, 500mw@600Ω, 1%THD Gain: +14dB 6.35mm unbalanced headphone output SNR: 116dB A-weighting THD+N:<0.0005%@20Hz-20kHz 2VRMS Frequency Response: 20Hz-20kHz ±0.1 -3dB@90kHz Output Impedance:<11Ω Output Power: 1200mW@33Ω, 260mW@300Ω, 130mW@600Ω, 1%THD Gain: +14dB Aux input SNR: 100dB A-weighted THD+N: <0.0035%@1k, <0.0035%@20Hz-20kHz Frequency response: <0.0035%@20Hz-20kHz Channel crosstalk: >-105dB Input level: 2.1VRMS Maximum Network LAN: 10/100/1000 Mbps WLAN: 2.4 GHz / 5 GHz USB Type C The USB Type C port provides a maximum power of 5V/1.5A. The USB port works with devices which conform to the USB mass storage standard and supports FAT, FAT32, exFAT and NTFS file formats, but is not guaranteed to be compatible with all storage devices. MA player Controller app: MA remote app Local playback format supported: MP3 , WMA , WAV , AIF, AIFC, AIFF, AAC, FLAC, OGG, APE, ALAC, M4A, DSF, DFF, CUE PCM sampling rate:  PCM 16-24Bit 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 705.6kHz, 768kHz MQA  16-24Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz MQA or MQA Studio stream DSD sampling rate: 2.8MHz, 5.6MHz, 11.2MHz, 22.4MHz Roon Ready: Under certification test PCM sampling rate:  PCM 16-24 Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 705.6kHz, 768kHz MQA  16-24 Bit /44.1 kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz MQA or MQA Studio stream DSD sampling rate: DSD 2.8MHz, 5.6MHz, 11.2MHz, 22.4MHz Power specs Power voltage: AC 100V-240V 50/60Hz Standby power consumption: <5W Maximum power consumption: <30W Weight and size Weight: 2.87 pounds Size: 8.8” width, 7.32” depth, 2.07” height

Read more less

Product highlights Network streaming support with MA player and MA Remote App High-quality sound output with ES9039Q2M D/A chip User-friendly touchscreen interface and optional RM5 remote control High-res local and online music playback Versatile audio input and playback options Gigabit Ethernet for smooth network audio streaming Specs CPU: Quad Cortex-A55 2.0GHz D/A chip: ES9039Q2M COAXIAL & OPTICAL:  PCM 16-24Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz DSD 2.8MHz (DoP) HDMI ARC: PCM 16-24Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz USB Audio PCM 16-24Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 705.6kHz, 768kHz MQA 16-24Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz MQA or MQA Studio stream DSD 2.8MHz, 5.6MHz, 11.2MHz (DoP) DSD 2.8MHz, 5.6MHz, 11.2MHz, 22.4MHz (Native) Aux input SNR: 100dB A-weighting THD+N: <0.0035%@1k, <0.0035%@20Hz-20kHz Frequency response: 20Hz-20kHz ±0.1 -3dB@46kHz Channel crosstalk: >-105dB Input level: 2.1VRMS Maximum XLR SNR: 127dB A-weighting THD+N:<0.00015%@1k, <0.00018%@20Hz-20kHz Frequency Response: 20Hz-20kHz ±0.1 -3dB@90kHz Channel Crosstalk: >-146dB Output Level: 4.4VRMS@0dB RCA SNR: 121dB A-weighting THD+N:<0.00015%@1k, <0.00030%@20Hz-20kHz Frequency Response: 20Hz-20kHz ±0.1 -3dB@90kHz Channel Crosstalk: >-133dB Output Level: 2.2VRMS@0dB LAN: 10/100/1000 Mbps The USB Type C port provides a maximum power of 5V/1A. The USB Type C port works with devices which conform to the USB mass storage standard and supports FAT, FAT32, exFAT, and NTFS file formats, but is not guaranteed to be compatible with all storage devices. Local playback format supported: MP3 , WMA , WAV , AIF, AIFC, AIFF, AAC, FLAC, OGG, APE, ALAC, M4A, DSF, DFF, CUE PCM sampling rate:  PCM 16-24Bit 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 705.6kHz, 768kHz MQA  16-24Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz MQA or MQA Studio stream DSD sampling rate: 2.8MHz, 5.6MHz, 11.2MHz, 22.4MHz Roon Ready: Under certification test PCM sampling rate:  PCM 16-24 Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 705.6kHz, 768kHz MQA  16-24 Bit /44.1 kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz MQA or MQA Studio stream DSD sampling rate: DSD 2.8MHz, 5.6MHz, 11.2MHz, 22.4MHz Power voltage: AC 100V-240V 50/60Hz Standby power consumption: <5W Maximum power consumption: <20W Weight: 2.87 pounds Size: 8.8” width x 7.32” depth x 2.07” height

Read more less

The Matrix Element I2 is part of the brand's line of network players, functioning as a complete standalone source device for your audio system and bringing your traditional HiFi system into the world of high-resolution streaming. With the Element I2, you can enjoy your music in many ways. Whether your files are stored on a device on your local network (computer, NAS...), on a USB storage device or on your smartphone, they are accessible from the Element I2. The streamer also supports DLNA and AirPlay2 streaming protocols as well as Spotify Connect and TIDAL Connect, allowing you to send your music to the I2 directly from a smartphone, for example. Many music streaming services are also accessible from the network player, such as Spotify, TIDAL or Qobuz, but also to a wide range of web radios thanks to vTuner. With the free MA Remote mobile app you can browse your local music files, access your favorite streaming services and web radios, and control playback remotely, right from your smartphone. Firmware updates for the Element I2 can also be managed through the app. The I2 can also be connected in WiFi thanks to the integration of a dual-band antenna 2.4GHz and 5GHz. SPECIFICATIONS Product type Streamer Inputs 1x Coaxial1x Optical1x I2S LVDS via HDMI1x USB-B1x RJ45 Outputs 1x Stereo RCA1x Stereo XLR1x Balanced Jack 4.4mm headphone output1x Single-ended Jack 6.35mm headphone output CPU NXP i.MX 6Quad Cortex-A9 DAC Chip ES9038Q2M Clock Crystek CCHD-950 Supported sampling rates Coaxial / Optical : PCM up to 24bit 192kHz, DSD DoP64I2S LVDS : PCM up to 32bit 768kHz, Native DSD up to DSD512, DSD DoP up to DSD256USB-B : PCM up to 32bit 768kHz, Native DSD up to DSD512, DSD DoP up to DSD256, MQA up to 24bit 384kHz SNR RCA Output : > -118dB A-WeightingXLR Output : > -120dB A-WeightingBalanced Jack 4.4mm headphone output : > -116dB A-WeightingSingle-ended Jack 6.35mm headphone output : > -114dB A-Weighting THD+N RCA Output : < 0.00035% @ 1kHz, < 0.00050% @ 20Hz-20kHzXLR Output : < 0.00025% @ 1kHz, < 0.00035% @ 20Hz-20kHzBalanced Jack 4.4mm headphone output : < 0.0006% @ 20Hz-20kHz 4VrmsSingle-ended Jack 6.35mm headphone output  : < 0.0008% @ 20Hz-20kHz 2Vrms Frequency response RCA Output : 20Hz-20kHz ±0.1 -3dB @ 80kHzXLR Output : 20Hz-20kHz ±0.1 -3dB @ 80kH6Balanced Jack 4.4mm headphone output : 20Hz-20kHZ ±0.1 -3dB @ 65kHzSingle-ended Jack 6.35mm headphone output : 20Hz-20kHz ±0.1 -3dB @ 65kHz Crosstalk RCA Output : > -130dBXLR Output : > -138dB Output level RCA Output : 2Vrms @ 0dBXLR Output : 4Vrms @ 0dB Headphone output impedance Balanced Jack 4.4mm headphone output : < 22ΩSingle-ended Jack 6.35mm headphone output : < 11Ω Headphone output power Balanced Jack 4.4mm headphone output : 1500mW @ 33Ω, 950mW @ 300Ω, 500mW @ 600Ω, 1% THDSingle-ended Jack 6.35mm headphone output  : 1200mW @ 33Ω, 260mW @ 300Ω, 130mW @ 600Ω, 1% THD Headphone output gain +16.5dB Network LAN : 10/100/1000MbpsWLAN : 2.4GHz / 5GHz Control app MA Remote Supported file formats MP3, WMA, WAV, AIF, AIFC, AIFF, AAC, FLAC, OGG, APE, ALAC, M4A, DSF, DFF, CUE Supported transmission protocols AirPlay 2DLNA/UPnPTIDAL ConnectSpotify ConnectvTuner

Read more less

Combo DACs The combination of the AKM AK4191EQ and AK4499EX DACs completely separates the digital and analog portions, while DWA Routing improves signal-to-noise and ensures natural, Hi-Res Audio reproduction. Dual THX AAA 78+ Amps Refining the AAA 78 amps found in the M11 Plus and Pro, FiiO equips the M23 with dual 4-way fully balanced THX AAA 78+ amps. They combine for true, balanced 8-way parallel amplification with greater power output while maintaining high fidelity music. Digital Audio Purification System Also known as DAPS, the Digital Audio Purification System is made up of a FiiO-developed Hi-Fi audio core that bypasses the stock Android core, and works with a low-jitter clock coprocessor. In addition to a unified low-jitter clock, this allows the M23 to maintain the original sampling rate of your music, no matter how it's being played. 4-Stage 20-Rail Power In order to handle all of this advanced analog and digital internal circuitry, FiiO gave the M23 a robust 4-stage 20-rail power supply. The system is comprised of independent digital and analog power supplies. The analog supply has separate rails for the DAC, small and large amplification parts, four stages of power processing: OVP, adaptive and LDOO voltage stabilization, high-efficiency voltage boosting, and Pi filtering.   A total of 28 high-capacity polymer tantalum capacitors are used to store large amounts of reserve energy when needed, with the primary analog power supply getting 4 KEMET low ESR high ripple suppression polymer tantalum capacitors, the THX power supply getting 12 KEMET capacitors, the I/V & LPF power supplies getting 6 AVX capacitors, and the DAC receiving 6 KEMET capacitors. Dual-Mode Fast Charging To help deliver the fastest charging times while maintaining battery health, the M23 can utilize extreme fast charging of up to 30W at a lower battery level, and auto-switch to a slightly slower normal fast charging mode when the battery is closer to being full. Super High Gain Mode When in fast charging, the M23's Super High Gain Mode can be activated for more gain and power to the audio outputs. Up to 1000mW + 1000mW per channel at 32 ohms, or up to 240 mw at 300 ohms, can be accessed for powering high impedance headphones. In addition, while in this mode the second USB-C port does not use power, so it can be repurposed to connect to a smartphone to use the M23 as a USB DAC. A High Gain Mode is also available, offering 475mW at 32 ohms or 55 mW at 300 ohms. Four Gain Levels Two low-noise OPA1612 op-amps for I/V and LPF stages, and two low-noise OPA1662 op-amps for voltage amplification come together to ensure audio is accurately played at the correct power output to support a wide variety of headphone and IEM types. Eight Panasonic Film Capacitors In the LPF section, 8 Panasonic film capacitors are used to give the M23 the ability to produce stable and consistent sound at each frequency band from both the left and right channels. Large 5500mAh Battery Equipped with a sizable 5500mAh battery for mobile use, the M23 is capable of up to 10.5 hours of runtime, or up to 9 hours of balanced battery runtime. A low-resistance MOS protection board is used to enhance overall battery life, and the battery supports fast 30W charging. With that level of charging, the M23 can achieve over 50% power from just 35 minutes of charging, or over 80% power after an hour. Global PEG & All-to-DSD A 10-band PEQ can be used in any operating mode to adjust EQ frequency points, gain, bandwidth, and Q value. This lets users fine tune or correct headphone frequency to their personal preferences, and All-to-DSD can be activated to experience audio in different formats. Six Operating Modes Enjoy your music the way you want with six different operating modes: Roon Ready, Android, Pure Music, Bluetooth, AirPlay, or over DLNA from a NAS, over a local network, or cloud servers through UPNP, SMB, or WebDav. Cutting Edge Design Utilizing the classic hexagonal honeycomb design of other FiiO portable players, the M23 boasts bold edges and 3D cuts in its metal frame, along with an electroplated tempered glass back panel. On the front is a large, 5.5" HD display with an 18:9 aspect ratio for easily navigating audio sources, viewing album art, and more. Intelligent Volume Adjustment Utilizing FiiO's second generation intelligent volume adjustment, you can dial in your levels by either clicking the physical built-in buttons, or sliding your finger on the textured carbon fiber touchpad. RGB Lights Pulsating RGB lights can be customized to your specific needs or used to give a visual indication of which sampling rate is currently being played. Two-Way Bluetooth As a Bluetooth transmitter, the M23 supports SBC, AAC, aptX, aptX HD, LHDC, and LDAC codecs, with support for SBC, AAC, and LDAC as a Bluetooth receiver. Additional Features Remote control from your phone via mobile app MQA 8x playback for master-grade sound Metal-reinforced ports for durability and reliable connections Stainless steel battery compartment for improved heat dissipation Digital core, DAC, and headphone amp are isolated and shielded from each other to reduce crosstalk and interference 3.5mm port for headphones, line, and coaxial output 4.4mm port for balanced headphone and line output Add more storage with an optional microSD card up to 2TB

Read more less

The FIIO M11S is a Hi-Res Audio and Hi-Res Audio Wireless certified portable music player that has a 5.15-inch bezel-less touchscreen. It features a Samsung Exynos 7872 chipset and offers 13 hours of battery life. Dual AK4493 High-Performance Audiophile DACs Inside the M11S are two AKM AK4493 DACs decoding your music. Compared to its AK4490 predecessor, not only has the Signal-to-Noise Ratio (SNR) been doubled but distortion has also been reduced by 1dB for greatly improved sound quality. Truly Balanced Audio Design The M11S has a specially custom-made OPA926 op-amp chip, which has a lower noise floor, lower distortion, and overall cleaner power compared to the AD8397 op-amp. Unbelievable Sound M11S has exceptionally good sound, especially with vocals and treble. The low-pass filter has been carefully adjusted, major improvements were made to the power supply, and key components such as resistors and capacitors were upgraded-resulting in the M11S reaching new heights in audio quality. Pushing the Boundaries of Wireless Hi-Fi With its support of Bluetooth 4.2, the M11S can transmit the SBC/aptX/aptX HD,LDAC/LHDC Bluetooth format as well as receive certain formats. A Music Player and a Capable Bluetooth Amplifier When set in the Bluetooth receiver mode, the M11S transforms into a high-quality Bluetooth amplifier, with significantly better frequency response, as well as lower distortion, noise floor, and cross talk compared to typical Bluetooth solutions. More Choices, Less Headaches The M11S has both 2.5mm and 4.4mm balanced output. It retains the 3.5mm single-ended output as well eliminating the need for cumbersome adapters. Straight Lines You won't find any curves on the M11S- rather, its body composed only of straight edges is the ultimate extension of the polygonal style. 18:9 Touchscreen Adorning the front of the M11S is a large and colorful 5.15-inch, 10-point multitouch screen with 1440 x 720 resolution to give you an immersive experience. Glass-Backed Design The modern glass-backed design allows you to instantly make a tactile connection with the M11S with just the palm of your hand. The glass back features PET cooling and the sophisticated carbon-fiber texture lets others know that the M11S means business. Gold Tactile Volume Wheel Adding a splash of contrasting color to the all-black body is a gold-colored volume wheel, whose texture has been further improved and refined compared to the previous player for an even better feel. Quick Charge 2.0 The M11S takes 2.5 hours to fully charge its battery. It can play music for up to 13 hours and be placed in deep sleep standby mode for 50 days. Two-way Bluetooth with LDAC Features a Samsung Exynos 7872 chipset Long battery life Quickly charges in 2.5 hours Dual-band Wi-Fi 3GB Ram and 32GB storage Gold tactile volume wheel Modern glass-backed design

Read more less

Multifunctional digital interface with support for USB, AES/EBU and HD Bluetooth inputs ; P.A.S.S. (Precision Access Servo System), natively supports MQA-CD ; Clock inputs and outputs, supporting 44.1kHz word clock and 10MHz standard or atomic clock ; USB support up to 32bit/768kHz, DSD512, support MQA full decoding ; The AES/EBU input supports full MQA decoding, making it possible to use it as a standalone MQA decoder ! Uses two pieces of low-phase noise, high precision femtosecond local crystal oscillators ; Selectable 50Ω or 75Ω clock input matching impedance ; Built-in CLOCK ALIGNMENT processor for CD sound reconstruction . Built-in dual toroidal power transformers, And multiple sets of linear power supplies ; Qualcomm high-end Bluetooth chip, support LDAC (24bit/96kHz), APTX/HD, SBC, AAC ; With optical, coaxial, I 2 S and two independent AES/EBU outputs ; Using a tempered glass fully laminated IPS display and a newly developed UI ; Support DOP and bit display function, making it easy to identify the current audio source format ;

Read more less

Android Lossless Digital Music Player The Darwin architecture is HiBy’s in-house developed all new hi-res digital signal processing architecture. In a breakthrough evolution of traditional R2R architecture, the system includes resistor ladder linearity compensation, and for the first time includes advanced functions such as linear FIR filter, nonlinear harmonics control, switchable oversampling / NOS, and DSD bypass on portable equipment. The end-to- end flexible architecture is fully configurable, creating endless possibilities for future upgrades and endless evolution. Complete R2R-based amplification stage Full of musicality, vibrant and natural, the R2R-based amplification stage brings music alive and performers onstage in an immersive experience. DSD bypass function With separate LPFs for PCM and DSD, native DSD decoding on an R2R system is no longer an oxymoron. The DSD specific LPF effectively reduces HF noise caused by the delta-sigma modulation process, optimizing DSD audio reproduction. Highly accurate audio crystal oscillators Press button to toggle charging in USB DAC mode--uncharging mode reduces battery consumption on smartphone and isolates device from external power supply noise. PRODUCT SPECIFICATIONS DACHiBy proprietary discrete DARWIN R2R DAC Operating systemAndroid 9.0 SoC modelSnapdragon 660 Body MaterialsPure Copper Dimensions130*73*15 mm WeightApprox. 315G Charging TimeApprox 3 Hours (0-100%) Frequency response (to -3dB)20-45kHz S/N Ratio114 Db Dynamic Range95 Db THD+N0.003% Output Impedance0.4Ω

Read more less

nmistakable ONIX Design Classic ONIX look modernized for today, Overture fits perfectly alongside Miracle and Mystic. Main body crafted by CNC machines from high-grade aluminium, providing the perfect construction that’s strong and beautiful, especially when paired with the gold-plated volume wheel. High-End Audio Configuration Inspired by the audio design of the ONIX Miracle stack, Overture brings the sound of the flagship ESS ES9039PRO DAC to a portable world. Highly detailed, overflowing with dynamics and energy, while bringing husky and smooth voices. Paired with two TPA6120A2 amplifiers for exceptional power from a portable device, offering over 1W @ 32 Ohm. Pure Music System Simple and fast system, powered by the Ingenic X2000 platform and designed for the most demanding audiophiles. Avoiding the distractions of modern smartphones and just offering the core music experience. Playing Hi-Res files from MicroSD card, streaming with Tidal or running over DLNA/Airplay, uninterrupted High Fidelity sound is guaranteed. Multifunctional Hi-Fi Component While designed mainly as a portable player for headphone users, ONIX XM5 will easily fit into many roles in your home, office or dedicated Hi-Fi rig. Simply streaming Youtube from your phone over Bluetooth, serving as the ultimate USB DAC/Amp with your work laptop, offering digital out for standalone USB DACs or acting as an independent DAC for your powerful monoblock amplifiers, Audiophiles will always find new ways how to utilize the XM5 to its fullest potential. Specification Dimensions: 115 x 70 x 19 mm Weight: 275g System Platform: Ingenic X2000 System: In-House Developed Display: Square 3-inch OLED Touch Screen 720p Playback: MicroSD Card (up to 2TB), Tidal Online Streaming Controls: Touch Screen, 4 Hardware Buttons, Volume Wheel Remote Controls: SyncLink through Eddict Player app (Android & iOS) Bluetooth Connectivity: Two-Way Bluetooth 5.2 Bluetooth Codec Support: LDAC / aptX HD / aptX / SBC / AAC Wi-Fi Connectivity: 2.4G/5G, DLNA, AirPlay, Tidal USB DAC: Dedicated XMOS XU316 Chip Hi-Res File Support: PCM 768kHz / 32bit, DSD512 Headphone Outputs: 3.5mm Single-Ended, 4.4mm Balanced Battery: 7000 mAh, standard USB-C charging port Battery life: Up to 14 hours SE, 12 hours BAL 3.5mm Single-Ended Output Output Power Low gain: 0.79V@32Ω (19mW@32Ω) (THD+N<0.002%) Output Power High gain: 3.15@32Ω (310mW@32Ω) (THD+N<1%)   3.65V@300Ω (40mW@300Ω) (THD+N<0.02%) Output Impedance: 4.7Ω    4.4mm Balanced Output  Output Power Low gain: 1.5V@32Ω (75mW@32Ω) (THD+N<0.0008%) Output Power High gain: 5.7V@32Ω (1069mW@32Ω) (THD+N<1%)   6.9V@300Ω (158mW@300Ω) (THD+N<1%)   Frequency Response: 20Hz-40kHz (-0.5dB) THD+N: 0.0006% @32Ω (A-Weight) Dynamic Range: 121dB @32Ω (A-Weight) Channel Separation: 100dB Signal-to-Noise Ratio : 121dB @32Ω (A-Weight) Noise: 109dB @32Ω (A-Weight)  Output Impedance: 6.6Ω  

Read more less

Eight DACs In One Audio Player The DX260 features a whopping eight DAC chips - configured with the flagship-level CS43198 DAC from Cirrus Logic. This results in amazing detail and layering for any genre of music out there. Because of the new Octa-DAC design, the DX260 has excellent dynamic range and is able to bring out even the most minute detailing in your favorite music. The music player also features an impressively low noise floor, bringing it to spec with some of the top-performing gear on the audiophile market. The DX260's measurements are some of the best for music players. THD+N hits an astounding -123 dB! DNR and SNR measurements are leaps ahead of what the DX240 offered as well. This is a new standard in excellence for iBasso, and provides amazing performance that is unmatched at this price range. New FPGA-Master 2.0 System Controller - Complete Synchronization For Your Music The DX260 features the latest system controller update from iBasso with the FPGA-Master 2.0. The system controller directly requests audio data from the SoC (system-on-a-chip) and plays a critical role in maintaining signal integrity and reproduction. It syncs all the audio clocks with two NDK femtosecond oscillators that work in unison as a fully synchronized, single clock source. The FPGA-Master 2.0 system controller also offers haspicosecond-level precision and control, as well as adjusts the DAC clock, data, and constructing the FIR filter. Say "Goodbye" to Distortion The DX260 DAP Music player is equipped with a synchronous parallel output mode which reduces the discrete distortion between the DAC configuration and improves the overall performance of the DAC network. Each DAC Data Stream is Independently Adjustable With the implementation of the FPGA-Master 2.0, the DX260 is able to obtain incredibly precise control of the DAC clock and the data it receives. This effectively makes each DAC data stream independently adjustable. Why is this important? Because through a delay parallel of 4 DACs, the chips form a hardware analog FIR filter. This averages the differences between multiple DACs, reducing and minimizing distortion while improving the sound detail and realism at the same time. Specifications USB C： USB 3.1 Output Port: 4.4mm balanced phone out/ 3.5mm single ended phone out/ 4.4mm line out/ 3.5mm line out/ 3.5mm coaxial output/ USB OTG output WiFi: 802.11b/g/n/ac（2.4Ghz/5Ghz) Bluetooth: V5.0 RAM+ROM: 4G LPDDR4X, 64G ROM Battery: 4400mAh 3.8V li-polymer battery Charging Time: 2.5 hours Average Play Time: 14 hours (The play time varies with different resolutions, volume used and headphone/IEM loads.) Size 123mm*74.5mm*17.5mm Weight: 229g Contents: DX260 Player/ USB-C cable/ coaxial cable/ TPU case/ screen protector/ warranty card/ quick start guide 4.4mm Balanced Phone Port: Maximum Output Level: 6Vrms Output Power: 1015mW + 1015mW @32ohm，THD＜0.5% Frequency Response: 10Hz~75kHz -1dB S/N: 133dB Dynamic Range: 133dB THD+N: -121dB (A-wt, 600ohm load) -114dB (A-wt, 32ohm load) Crosstalk: 145dB Noise Floor: < 930nV (Low-Gain) 3.5mm Single Ended Phone Out: Maximum Output Level: 3Vrms Output Power: 280mW + 280mW@32ohm， 586mW + 586mW@16ohm，THD＜0.1% Frequency Response: 10Hz~75kHz -1dB S/N: 128dB Dynamic Range: 128dB THD+N: -115dB (A-wt, 600ohm load) -110dB (A-wt, 32ohm load) Crosstalk: 118dB Noise Floor: < 850nV (Low-Gain) 4.4mm Balanced Line Out: Maximum Output Level: 4Vrms Frequency Response: 10Hz~75kHz -1dB S/N: 133dB Dynamic Range: 134dB THD+N: -123dB Crosstalk: 145dB 3.5mm Single Ended Line Out: Maximum Output Level: 2Vrms Frequency Response: 10Hz~75kHz -1dB S/N: 128dB Dynamic Range: 128dB THD+N: -112dB Crosstalk: 115dB

Read more less

The MR-2 from Korg offers incredibly high-quality 1-bit recording in an ultra-portable design that's great for reporters, musicians, field audio recordists, and more. The MR-2 supports DSDIFF, DSF, and WSD 1-bit formats to capture every detail of the sonic world around you at SACD quality. It can also record multi-bit PCM formats at rates up to 24-bit/192kHz. The MR-2 writes your files to widely-available SD/SDHC flash memory cards for convenient storage and sharing. The included AudioGate software allows you to convert your 1-bit files into today's most popular file formats, including AIFF, FLAC, and MP3. Korg MR-2 Handheld 1-bit SD Recorder Features at a Glance: Multiple-format recording and playback, including SACD ultra-high-quality 1-bit DSD at 2.8224MHz, as well as multi-bit PCM formats up to 24-bit/192kHz DSDIFF/WSD/DSF/WAV(BWF)/MP3/MP2 recording and playback supported High-performance XY-configuration stereo electret condenser mic that's capable of rotating 210 degrees Screw mounts for easy tripod mounting 3.5mm mic input 3.5mm line input 3.5mm headphone output High-performance analog limiter, low-cut filter, and bass EQ 40 recording setups, with mic sensitivity, limiter, low-cut filter, and bass EQ settings 10 custom user settings Records directly to (and plays back from) SD or SDHD cards USB 2.0 (Mini-B-type USB connector) for high-speed data transfer Korg chromatic tuner built-in 128 x 128 pixel LCD with noiseless backlight Operates on 2 AA nickel-metal hydride batteries or via USB bus power

Read more less